|
|
The
round R-Ring is the traditional and the most economic. It can be
mounted on the spine or on the back cover. The rivets are exposed
and can be in many colors. On some binders the rivets can be also
concealed. It is not possible to utilize the full capacity of the
ring if the mechanism to be mounted on the back cover. Also
available to accommodate a wide array of sheet sizes and with a
number of rings with or without boosters or locking mechanisms. The full
capacity of this type of mechanism range from 15 mm to 55
mm.
|
|
|
|
|
The
D-Ring mechanisms are almost mounded on the back cover. The full
capacity is measured vertically along the straight side of the ring.
It is possible to utilize the full capacity of the ring. Available
capacities range from 15 mm to 55 mm.
|
|
|
In
Europe the Q-Ring mechanisms are useful for a large capacity and be
mounted on the back side of binder.
|
|
|
The
Slanted D-Ring named also Angle-D-Ring are comparable in capacity
to the D-Rings, but require less total width of a binder. To compare
the D-Ring this ring is easy to open and close and
allows for easy page turning. The inserted
paper sheets not on the same line, but allow index tabs to be more
readable since the text is indexed. Available in most standard sheet
sizes and capacities.
|
|
|
The
Lever Arch Mechanism with it's 2 ring European style is primarily
used for paper board type binder, however it is very popular
in Europe that two LA mechanisms be mounted on one binder.
Available with compression bar and riveting plate.2" and
3" capacities are mostly used for. Lever design allows for easy
loading and unloading.
|
|
|
Lever clips, Deluxe clips and Jumbo clips are primarily used for the
paper ring binders or poly ring binders. All clips are corrosive
resistant bright nickel finish.
|
|
|
Three standard sizes of memo mechanisms with lower or high boosters
are ideal for holding data processing materials. They are
recommended for organizer, address books and pocket calendars,
specialty advertising books.
|
|
|
The Multi-Ring mechanisms are mostly used
in Japan and US market. The number of the rings depends on the sheet
sizes that provided by the customer. Multi-Ring
mechanisms open by boosters and made from
plastic or bright nickel finish. Recommended uses are name card
holder, photo albums and sales catalogs.
|
|
|
A variety of fittings and mechanisms are available to enhance any
binders or folders. Our Services team can advise on different
options according to your requirements. Plastic and metal parts for binders extra. Metal corners in many
colors; wire and plastic
compression bar; pen holders; rivets and eyelets in custom colors
and many other special parts
for easy opening of cases and boxes.
|
